Plasmonic Nanoparticle Embedded PDMS Micropillar Array and Fabrication Approaches for Large Area Cell Force Sensing
SUMMARY
UCLA researchers in the Department of Mechanical and Aerospace Engineering have developed a novel cell force sensor platform with high accuracy over large areas.
BACKGROUND
Microfabricated elastic pillar substrates with various geometries have been widely used for drug development, cell stiffness studies to probe for cancer, and to understand mechanotransduction of cell functions. To obtain high contrast, fluorescent labels typically are used at the tips of the pillars, which either degrade, are digested by the cells, or dissolve in media over time. Likewise, they are not uniformly coated on the pillars and require high magnification (> 60x) to obtain 30 nm to 50 nm position resolution of the pillar. This results in a limited field of view (FOV), less than 100 µm x 100 µm, and makes it difficult to monitor large scale cell behavior and to provide high throughput and large area measurements.
INNOVATION
Researchers led by Professor Chiou have invented a novel plasmonic cell force sensor platform with superior force sensing across large areas. This system can be fabricated on silicon substrates using standard microfabrication techniques with a spatial resolution of ~30 nm under a 20x objective lens and a 450 µm x 340 µm FOV. This plasmonic nanoparticle (NP) embedded micropillar material provides a strong signal-to-noise ratio for high precision position tracing and a point-source-like image pattern for sub-pixel resolution tracing, even under low magnification. The plasmonic NPs in this system can be used as a heating source for single cell ablation applications or used to porate cells for large area drug delivery.
APPLICATIONS
- Cell stiffness measurements for cancer detection
- Single cell ablation
- Drug delivery via poration
- Drug development
ADVANTAGES
- 30 nm spatial resolution using 10x magnification
- 450 µm x 340 µm FOV
- Excellent signal-to-noise ratio and high precision position tracing
- Sub-pixel resolution at low magnification
- Single cell heating for inducing cell death or poration for drug delivery
- Uses standard microfabrication techniques
STATE OF DEVELOPMENT
Prototype plasmonic NP-embedded micropillar array devices have been fabricated and cell forces were successfully mapped over the pillar array with a 20x objective lens using Madin-Darby canine kidney epithelial cells.